Performance of self-etching adhesives on caries-affected primary dentin treated with glutaraldehyde or silver diamine fluoride.

OBJECTIVES: to evaluate the quality and stability of adhesive interfaces established by self-etching adhesives on caries-affected primary dentin (CAD) treated with glutaraldehyde (GA) or silver diamine fluoride (SDF). METHODS: 42 primary molars were exposed to a microbiological caries-inducing protocol and divided into 6 groups according to the adhesive system (Clearfil SE - CL or FL Bond II - FL) and pretreatment (water, GA or SDF) applied on CAD. One tooth from each group was analyzed for surface modification using infrared spectroscopy. Crowns were restored with resin composite (n = 36) and cut into beams and slices. The beams were subjected to microtensile testing, Raman spectroscopy and SEM after 24 h and 6 months of storage. The slices were analyzed using Micro-Raman spectroscopy to determine the diffusion zone thickness (DZ) in each period. Data were analyzed by ANOVA and Tukey or Kruskal-Wallis and Dunn tests (α = 0.05%). RESULTS: SDF reduced the immediate bond strength for both adhesives. The control groups showed a decrease in BS after 6 months in artificial saliva. GA increased immediate DZ for FL, while SDF had the opposite effect on CL. GA decreased the DZ for FL at 6 months. There was a predominance of adhesive failures with areas of cohesive dentin fractures within control groups. SIGNIFICANCE: Modifications caused by dentin surface treatments may directly affect the performance of adhesive systems and the quality and stability of adhesive restorations.

Boosting the photodynamic activity of erythrosine B by using thermoresponsive and adhesive systems containing cellulose derivatives for topical delivery.

Erythrosine displays potential photodynamic activity against microorganisms and unhealthy cells. However, erythrosine has high hydrophilicity, negatively impacting on permeation through biological membranes. Combining biological macromolecules and thermoresponsive polymers may overcome these erythrosine-related issues, enhancing retention of topically applied drugs. The aim of this work was to investigate the performance of adhesive and thermoresponsive micellar polymeric systems, containing erythrosine in neutral (ERI) or disodium salt (ERIs) states. Optimized combinations of poloxamer 407 (polox407) and sodium carboxymethylcellulose (NaCMC) or hydroxypropyl methylcellulose (HPMC) were used as platforms for ERI/ERIs delivery. The rheological and mechanical properties of the systems was explored. Most of the formulations were plastic, thixotropic and viscoelastic at 37 °C, with suitable gelation temperature for in situ gelation. Mechanical parameters were reduced in the presence of the photosensitizer, improving the softness index. Bioadhesion was efficient for all hydrogels, with improved parameters for mucosa in contrast to skin. Formulations composed of 17.5 % polox407 and 3 % HPMC or 1 % NaCMC with 1 % (w/w) ERI/ERIs could release the photosensitizer, reaching different layers of the skin/mucosa, ensuring enough production of cytotoxic species for photodynamic therapy. Functional micelles could boost the photodynamic activity of ERI and ERIs, improving their delivery and contact time with the cells.

Formulation and performance evaluation of emulgel platform for combined skin delivery of curcumin and propolis.

The environment can modify the physiology and body protective function of the skin. Propolis (PRP) and curcumin (CUR) possess important antioxidant and antimicrobial properties, and they can be administered in a combined way and using photodynamic therapy (PDT). Emulgels can control drug release due to the physicochemical properties of the gel and the emulsion. They constitute a good strategy for achieving an improved platform for the combined delivery of PRP and CUR. There are no other studies of emulgels composed of PRP and CUR and their performance as antimicrobial and skin healing using or not PDT. This study aimed to investigate the effect of Carbopol 934 P (C934P), 974 P (C974P) or polycarbophil (PC) on physicochemical stability, antioxidant activity, drug release profile, antimicrobial activity, and ex vivo skin permeation and retention of emulgels containing PRP and CUR. Formulations containing C974P or PC displayed improved stability and antioxidant activity. They displayed activity against Staphylococcus aureus and modified (extended) drug release, governed mainly by non-Fickian anomalous transport. C974P and PC resulted in improved emulgels for combined CUR and PRP delivery, allowing the drugs to cross the stratum corneum, and permeate the epidermis, reaching the dermis. The selected emulgels are candidates for further studies to prove their action and benefits to skin health.

Influence of thickness and degree of opacity of lithium disilicate on the degree of conversion and bond strength of resin cements.

The aim of this study was to evaluate the influence of various opacities and thicknesses of lithium disilicate on the degree of conversion (DC) of two resin cements and on their bond strength (BS) to the ceramic. Two hundred and forty ceramic samples of lithium disilicate with high translucency (HT), low translucency (LT), and medium opacity (MO) were obtained from IPS e. max CAD in five different thicknesses. Light-cured and dual-cured resin cements were used for DC (n = 9) and BS (n = 8). Cement samples were light-cured under ceramic samples and analyzed using a Raman confocal spectrometer to determine the DC. For BS, resin cement cylinders were fabricated using ceramic samples which were thsen subjected to a microshear bond strength test. The mean values were provided for statistical analysis. The increase in thickness resulted in a decrease in DC for both cements under all experimental conditions, but only affected the BS of the light-cured cement for the MO ceramic. Comparing the opacities, the most translucent ceramics with particular thicknesses exhibited higher DC values than the less translucent ceramics. The LT and MO ceramics with certain thicknesses exhibited the highest BS values than the HT. The dual-cured cement generally showed highest values in both analyses than the light-cured cement. A thicker and more opaque ceramic material can reduce the DC of the cement. The BS decreases with the increasing thickness of the more-opaque ceramics.

Plastic ingestion by carnivore fish in a neotropical floodplain: seasonal and interspecific variations.

Some studies have shown that freshwater ecosystems are polluted in a similar proportion to marine ecosystems; however, there are many gaps to be filled in this topic. Here, we investigated whether plastics were consumed by carnivore fishes in a Neotropical floodplain and whether it was connected to seasonality (dry and wet seasons). We also evaluated the association between each type of plastic and the fish species. We analyzed the gastrointestinal contents of 23 species and assessed the occurrence and number of plastic particles. Plastics were obtained through chemical digestion and the spectrum of each sample, using a FT-IR imaging microscope. We performed a correspondence analysis (CA) with plastic data to assess the relationship between each type of plastic and the fish species. We also performed linear regression models to assess the relationships of occurrence and number of plastics ingested with seasonality. Nine species had plastics in their gastrointestinal contents, and they were identified as polyvinyl alcohol (PVA), polyamide (PA), polyethylene (PE), polystyrene (PS), and polypropylene (PP). The number of plastics had a positive relationship with the wet season, while the occurrence did not show a significant relationship with any season. These results are particularly important when considering the socioeconomic relevance and the ecological importance of this trophic guild.

Insights on the etiopathogenesis of onychomycosis by dermatophyte, yeast and non-dermatophyte mould in ex vivo model.

Fungal biofilms have been involved in the pathogenesis of onychomycosis, but the aspects contributing to this association need to be enlightened. This study aimed to investigate the ability of three different fungi to form biofilm on the nail. All evaluated fungi were able to grow on the nails, using them as the only nutritional source and formed a structure strongly suggestive of biofilms. However, their architecture and morphology were highly contrasting: Candida albicans showed dense growth, exhibited a well-structured community and a large amount of extracellular matrix (ECM), and FTIR-ATR spectroscopy reinforced these findings revealing components suggestive of the biofilm. For Fusarium oxysporum, these events were also observed, but in lower intensity. Furthermore, while Trichophyton rubrum presented a well-organized architecture, the ECM was not visualized. We hypothesize that these findings are related to the symptomatology of onychomycosis. When it is caused by a non-dermatophyte, it usually is accompanied with paronychia, pain, oedema, inflammation and few signals of keratolysis, while dermatophytes are more associated with intense onycholysis and absence of the inflammatory signals. Biofilm seems to be crucial for non-dermatophytes to cause onychomycosis, but not for T. rubrum.

Performance of Two Extracts Derived from Propolis on Mature Biofilm Produced by Candida albicans.

Species of the Candida genus represent the third most common cause of onychomycosis, the most frequent and difficult to treat nail infection. Onychomycosis has been attributed to fungi organized in biofilm and some natural products have proved promising for its treatment. This study aimed to evaluate the antibiofilm activity of propolis extract (PE) and its by-product (WPE) on 7-day preformed biofilms produced by Candida albicans in polystyrene microplates, as well as in an ex vivo model on human nail fragments. The cytotoxicity and permeation capacity were also assessed. Firstly, multiple parameters were evaluated over 7 days to elucidate the dynamics of biofilm formation by C. albicans. The cell viability and total biomass did not vary much from the beginning; however, days 3 and 4 were crucial in terms of metabolic activity, which was significantly increased, and the levels of extracellular matrix components, wherein proteins and nucleic acids experienced an increase, but polysaccharide levels dropped. Architecturally, one-day biofilm showed a monolayer of organized cells (blastoconidia, hyphae, and pseudohyphae), while in the seven-day biofilm there was a three-dimensional well-structured and complex biofilm. This yeast was also able to form a biofilm on both surfaces of the nail, without an additional nutritional source. Both extracts showed excellent antibiofilm activity against the 7-day preformed biofilm and were not toxic to Vero cells at concentrations compatible with the antifungal and antibiofilm activities. Both extracts permeated the experimentally infected nail, with WPE being more efficient. The results of this study, taken together, reinforce the potential of these natural products, containing propolis, as a safe option for the topical treatment of onychomycosis.

Opalescence and color stability of composite resins: an in vitro longitudinal study.

OBJECTIVES: This study aims to evaluate the opalescence (OP) and color stability of composite resins over a period of 180 days and to compare composite resins' OP with enamel's OP. MATERIALS AND METHODS: Twenty human enamel specimens (5.0 × 0.3 mm) and 9 specimens (10.0 × 1.0 mm) of 10 colors of 4 different composite resins (3 M ESPE, FGM, Ivoclar-Vivadent, Miscerium) and one brand of adhesive (3 M ESPE) were made. The results were obtained by measuring the reflectance and transmittance spectra in the visible region. After baseline measurement, composites and adhesive were analyzed after 2, 7, 30, 60, 120, and 180 days. The Lab color coordinates were used in the calculations of the OP parameter and color differences in the CIELab and CIEDE2000 methods. The data were analyzed statistically. RESULTS: The materials tested showed variation and an increase in OP over time. The OP found for enamel was 18.06 ± 2.99, and some resins showed higher results. There was a strong correlation between the coordinate b*T and the OP over time. Enamel Plus was the only one material that presented no color changes during all periods in both color analyses. Filtek Z350 XT, AT, and BT did not show differences in any time when analyzed by CIELAB. CONCLUSIONS: The OP of most composite resins changed during the period of 180 days and was different from the OP of tooth enamel. In general, composites demonstrated small color changes over the period tested, being this characteristic material dependent. CLINICAL RELEVANCE: Natural teeth present different optical properties. Composite resins restorations should present properties similar to natural teeth and it is important that characteristics like color and opalescence remain stable over time.

Characterization of a biofilm formed by Fusarium oxysporum on the human nails.

BACKGROUND: Fusarium spp. has been considered as an onychomycosis agent, but little is known about the etiopathogenesis of fusarial onychomycosis; thus, the objective of this study was to characterize the fungal-nail interaction and the consequences of the nail infection process by Fusarium oxysporum using the human nail, in an ex vivo model. METHODS: The kinetic of biofilm production and infection by F. oxysporum using the nail as the only nutritional source were evaluated by scanning electron microscopy, number of culturable cells, metabolic activity, characterization of extracellular matrix, spectroscopy and histopathology analyses. RESULTS: After evaluating the biofilm kinetic over 7 days using different parameters and techniques, it was possible to characterize the Fusarium-nail interaction. CONCLUSIONS: This study is a part of a big project aiming to clarify the fusarial pathogenesis and contributes to proving F. oxysporum is able to adapt, grow, develop, and form a biofilm on healthy human nails, which are crucial steps for the invasion process.

Studies of the early stages of the dynamic setting process of chemically activated restorative glass-ionomer cements.

OBJECTIVE: To evaluate the early stages of the setting process of chemically activated restorative glass-ionomer cements (GICs). MATERIAL AND METHODS: Five GICs were evaluated (n = 5): Equia Forte (GC), Equia Forte HT (GC), Ketac Universal (3M ESPE), Maxxion R (FGM) and Riva Self Cure (SDI) by Thermography, Fourier Transform Infrared Attenuated Total Reflectance Spectroscopy (FTIR-ATR) and Gillmore needle indentation mechanical testing. The FTIR-ATR spectra showed the formation of metal carboxylates within the cements and enabled the stabilization time (ST) to be determined and the thermographic camera measured the temperature field images in the sample. Data were statistically analyzed by ANOVA and Tukey-Kramer (α = 5%). RESULTS: The Gillmore needle test showed that the order of hardening was opposite to the order of ST values determined by FTIR. The results with the thermographic camera showed two stages of temperature variation, which coincided with the evolution of specific infrared bands. The exception was Maxxion R, which showed only a single step change in temperature. CONCLUSION: The early stages of the GIC setting reaction show temperature changes, both endothermic and exothermic, at specific times, confirming the occurrence of individual chemical reactions. The early setting involves reactions other than carboxylate formation.Significance: This study gives further detail of the early stages of the setting of GICs, and past research regarding the setting reaction of GIC.

Human Nails Permeation of an Antifungal Candidate Hydroalcoholic Extract from the Plant Sapindus saponaria L. Rich in Saponins.

We evaluated a hydroalcoholic extract of Sapindus saponaria L. pericarps (ETHOSS), as a candidate to a topical antifungal medicine for onychomycosis. ETHOSS was produced by extracting the crushed fruits in ethanol. The saponin contents were identified and characterized by electrospray ionization mass spectrometry. We measured the in vitro antifungal activity against three dermatophyte fungi, isolated from onychomycosis: Trichophyton rubrum, T. mentagrophytes, and T. interdigitale, using broth microdilution tests. The minimum fungicide concentration of ETHOSS ranged from 195.31 to 781.25 µg/mL. The cytotoxicity of the crude extract was tested on the HeLa cell line, and its ability to permeate into healthy human nails by photoacoustic spectroscopy and Fourier transformation infrared spectrometer (FTIR) spectroscopy by attenuated total reflection. Besides its strong antifungal activity, ETHOSS showed low cytotoxicity in human cells. It was able to permeate and reach the full thickness of the nail in one hour, without the aid of facilitating vehicles, and remained there for at least 24 h. These results suggest that ETHOSS has great potential for treating onychomycosis.

Evaluation of the influence of light-curing units on the degree of conversion in depth of a bulk-fill resin.

BACKGROUND: It is known that bulk-fill have been widely studied and used by dentists in the clinic. However, the use of light-curing units that do not have the ability to adequately light-cure these materials at the appropriate depth can affect their clinical performance. The aim of this study was evaluating the influence of 5 different light curing units (LCUs) on the degree of conversion (DC) of a bulk-fill resin at depths of 0 to 4 mm and determined the effect of using 20s exposure and 40s. MATERIAL AND METHODS: Cylinders of composite were made in a stainless steel matrix (n=10). The specimens were exposed from the top surface using 5 LCUs: Valo® Cordless (VA); Radii Plus (RA); Emitter.D (EM), Biolux Plus (BI), Woodpecker® (WO). The emission wavelength and the power density was determined. After the photoactivation, the Raman vibrational modes were calculated taking as reference the peaks at 1,601 (aromatic bonds C=C) and 1,640 cm-1 (aliphatic bonds C=C). RESULTS: The largest difference in DC in 20s, comparing the values obtained in the first and last layer is for BI, with a variation from 61.24% to 53.86%. Comparing the LCUs, the last layer in 40s DC values are 57.40% (BI), 58.21% (WO), 58.97% (VA), 60.90% (RA) and 62.42% (EM). The higher the dose (J/cm²) and the close the λmax is to the maximum CQ absorption length (λmax ~ 470 nm) the better the DC value. CONCLUSIONS: There was a significant difference in the DC values between the LCUs with increasing depth of the bulk-fill increments. Results indicate significant differences in DC among the different LCUs as well as enhanced DC when using 40s exposure compared to 20s. It is suggested that for DC improvement using lower power photoactivator increase the exposure time the exposure time should be 20s to 40s. Key words:Polymerization, Composite Resins, Raman spectroscopy.

Emulgels Containing Carbopol 934P and Different Vegetable Oils for Topical Propolis Delivery: Bioadhesion, Drug Release Profile, and Ex Vivo Skin Permeation Studies.

Topical administration can enable a more efficient therapy based on the improved bioavailability and patient compliance. Wounds and infections can lead to modifications of skin physiology and body protective function. Propolis (PRP) is utilized for skin protection and treatment. However, PRP extracts do not show suitable rheological characteristics and can cause irritation, pain, ulceration, and healing difficulties when they are administered on the harmed skin. Emulgels composed of Carbopol 934P (C934P) and different vegetable oils have been proposed for propolis extract release and may be a good strategy for topical delivery. The aim of this study was to investigate the bioadhesive properties, PRP release profile, skin permeation, and retention, by Franz's diffusion cell and photoacoustic spectroscopy (PS), of these emulgels. Formulations were composed of C934P and passion fruit oil (PF), sweet almond oil (SA), or andiroba oil (AO). PRP or by-product extracts were added to the systems, drug release profile was investigated, and porcine ear skin was utilized for analyses of bioadhesive properties, skin permeation, and retention. All formulations displayed similar bioadhesive force (0.05-0.07 N); PRP release was modified (prolonged), dependent on formulation composition, and mainly governed by diffusion. PS and analysis using diffusion cell showed that the systems could provide dermal permeation and retention, which was more effective for formulations containing AO. Considering the importance of propolis for many skin therapies, the emulgels containing AO for PRP delivery are worthy of biological studies and further clinical evaluation.

Design of a nanostructured mucoadhesive system containing curcumin for buccal application: from physicochemical to biological aspects.

Mucoadhesive nanostructured systems comprising poloxamer 407 and Carbopol 974P® have already demonstrated good mucoadhesion, as well as improved mechanical and rheological properties. Curcumin displays excellent biological activity, mainly in oral squamous cancer; however, its physicochemical characteristics hinder its application. Therefore, the aim of this study was to develop nanostructured formulations containing curcumin for oral cancer therapy. The photophysical interactions between curcumin and the formulations were elucidated by incorporation kinetics and location studies. They revealed that the drug was quickly incorporated and located in the hydrophobic portion of nanometer-sized polymeric micelles. Moreover, the systems displayed plastic behavior with rheopexy characteristics at 37 °C, viscoelastic properties and a gelation temperature of 36 °C, which ensures increased retention after application in the oral cavity. The mucoadhesion results confirmed the previous findings with the nanostructured systems showing a residence time of 20 min in porcine oral mucosa under flow system conditions. Curcumin was released after 8 h and could permeate through the porcine oral mucosa. Cytotoxicity testing revealed that the formulations were selective to cancer cells over healthy cells. Therefore, these systems could improve the physicochemical characteristics of curcumin by providing improved release and permeation, while selectivity targeting cancer cells.

Evaluation of photosensitizer penetration into sound and decayed dentin: A photoacoustic spectroscopy study.

BACKGROUND: Photodynamic therapy (PDT) may have topical indications. In those cases it is important for a topical photosensitizer to penetrate into the tissue to which it has been applied. This study aimed to compare the penetration of two different concentrations of erythrosine into intact and in vitro decayed dentin samples. METHODS: This in vitro study evaluated erythrosine (0.3 and 5%) penetration into sound (intact) and decayed dentin. A total of 11 dentin discs were prepared and divided into two equal halves, in order to keep one half sound while the other half was submitted to sterilization and an in vitro demineralization model for 5 days. Before erythrosine application, the organic and inorganic composition of all samples was evaluated by Fourier Transform Raman spectroscopy, and after erythrosine application for 30 min, the penetration depth was determined by Photoacoustic spectroscopy technique. RESULTS: The results indicated that 0.3% erythrosine showed a higher penetration depth into sound dentin (p = 0.002); and 5% erythrosine higher penetration into decayed dentin (p < 0.001). However considering clinical parameters, no statistically significant difference was found between any of the conditions tested. CONCLUSIONS: Erythrosine demonstrated ability to penetrate into dentin, irrespective of sound or decayed condition. Photoacoustic spectroscopy can be considered a method for estimating the penetration into hard tissues, and in conjunction with Raman spectroscopy, these are effective methods for evaluating the spectral response of dentin. Considering that erythrosine is capable of penetrating into decayed dentin, clinical trials are needed to test the effectiveness of this photosensitizer in Photodynamic therapy and Antimicrobial Photodynamic therapy.